iRest SL-A385 - Page 7

11
10
Set with safety switch in a power supply
box, if there is heavy pressure on power
supply box, then forced stop back lying
function, prevent hurts peoplewhen lying.
Method of usage Method of usage
3) Cut off the power of the whole machine.
Figure (Switch power off)
Diagram of the switch position of power supply
Power switch method map
WARNING
4.Calf installation
Install the rotating shaft incalf fixed axis first, noticed the hole should be aligned, so
that the R shape pin assembly (chart 1)
After calf is connected with the fixed axis aligned, then insert (chart 2)
chart 1 chart 2
Plug R pin, then moved to the other side of the calf, and the plug R pin (chart 3)
Finished (chart 4)
chart3 chart4
When the machine under the working state, with lying and calf rest lifting, you
could not apply gravity on the calf, to prevent the massage chair does harm to
peoplebefore dumping(chart1).
chart2).
Ensure the mechanism hands not in the seat part ,otherwise will cause
uncomfortable in the Buttock when you seating in the chair(
Note
chart1 chart2
Shortcut keys
Button
Description
Calf rest lifting button, press this button, calf restlifting slowly,
stop when release it.
Calf rest decline button, press this button, calf rest decline
slowly, stop when release it.
Backrest lifting button, press this button, backrest lifting slowly,
stop when release it.
Backrest decline button, press this button, backrest decline
slowly, stop when release it.
1)Press power button during massage progress, all massage function will be stop
immediately, the backrest and footrest will return to original position automatically,
meanwhile you can set up memory function. After rated working time, all massage
functions will be finished, meanwhile you can set up memory function, but
backrest and footrest won't return to original position.
2)Memory store function: After rated working time or switch off, the hand controller
displays "Memory" and glitter, remind the users whether need to store the
massage mode before turn off, you can press the memory function buttons
M1 or M2 as you like, store the massage mode.
3.Turn off power, stop massage
Pause and run button: to stop massage function you need to press
on/off button, if it stops more than 20 minutes, the massage chair will
shut down all the massage function