20
MANUFACTURED BY:
REMAX MEDI-TECH (SHENZHEN) CORPORATION
ROOM 303 OF FACTORY BUILDING, NO. 32,
HUI MING YI ROAD, GUIHUA COMMUNITY,
GUANLAN STREET, LONGHUA DISTRICT, SHENZHEN,
GUANGDONG PROVINCE, 518110, CHINA
+86-755-28012955
150 kHz to 80 MHz 80 MHz to 800 MHz 800 MHz to 2.5 GHz
d=1.2√P d=1.2√P d=2.3√
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.73
1 1.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from
structures,objects and people.
Separation distance according to frequency of transmitter (M)
Rated maximum output
power of
transmitter (W)
Recommended separation distances between portable and mobile
RF communications equipment and the iRestore Professional
The iRestore Professional is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The
customer or the user of the iRestore Professional can help prevent electromagnetic interference by maintaining a minimum distance
between portable and mobile RF communications equipment (transmitters) and
the iRestore Professional as recommended below,
according to the maximum output power of the communications equipment.
NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.
WARNING: Portable RF communications equipment (including peripherals such as antenna cables and external antennas), diathermy,
electrocautery, and RFID should be used no closer than 30cm (12 inches) to any part of the iRestore Professional, including
cables
specified by manufacturer. Otherwise, degradation of the performance of this equipment could result.
To Next Page
Loading...