12
iCAM Configuration
The iCAM 7 Series camera contains a configuration interface called the iCAM Configuration.
This configuration interface allows the installer to setup the iCAM’s IP Address, IrisServer
connection, and other configuration options.
From a PC with an internet browser connected to the network (that the iCAM7 series unit
is connected to), type the IP address of the iCAM. For example, if the IP address of an iCAM is
192.168.5.100 (default IP), you would access the configuration web interface by typing
http://192.168.5.100 from an internet browser.
To login, the User ID required when prompted is iCAM7000. The Password is iris7000.
The system is case sensitive when entering in your login credentials.
Once you have connected to the iCAM Configuration Interface - settings, information, and
options become available to further configure your system. Additional documentation for
setup and configuration can be found at:
http://www.irisid.com/productdocumentation
How to access the iCAM Configuration interface
To Next Page
Loading...