(c)2015 Iris Innovations Limited. All Rights Reserved. v01.00 24/09/15. E&OE
IRIS Centre Software (Continued…):
Multiple 710 cameras can be added to this system, and also configured in groups of cameras, but as default
there is a single group which should now contain one camera. By double-left-clicking the group from the
device list on the right of the screen, and then double-clicking the camera with the new IP address, it will be
displayed on the screen.
As per the Web-Browser interface, the default view will be a quad split-screen showing four different views
from the same camera, but as the IRIS Centre software can show multiple cameras there will also be three
other empty boxes displayed if you only have a single camera connected.
To view only the selected camera, then the “1x1” option from the Live View list on the right of the screen can
be selected to achieve this.
You can move each of these images to the desired positions by clicking and dragging within each section.
Using the mouse-wheel you can also zoom in and out of the image. Please note that when zoomed all the
way out, there will be less movement available as more of the original 360 source image is already being
displayed.
If a single larger video feed is desired, then by right-clicking the camera image, the “Panoramic monitoring
properties” menu offers multiple display options, including “single PTZ Screen” which will achieve this.
If a Single PTZ video feed is selected then the “Panoramic monitoring properties” menu will also allow you to
set the “Auto-Pan Speed” to the desired value. This would need to be set to 0 if you just wish to control the
camera manually.
To Next Page
Loading...