IRIS 3326-L User Manual

key features
Easy Mounting Options
The Iris Motion Sensor can be installed on a wall or in a corner using includ-
ed adhesive strips.
Remove-to-Pair Join Process
All Iris sensors feature “remove-to-pair” joining. The device ships with the
battery pre-installed and all that is needed to begin the joining process is to
pull out a small plastic tab from the bottom of the device. There is nothing for
the user to take apart or put back together.
Superior Output Power & Over-the-Air Updates:
The Iris Motion Sensor can detect motion up to 15-ft and supports over-the-
air updates providing for seamless upgrades and feature additions without
need for any user interaction.
getting started
Step 1
In the Iris by Lowe’s App, select the + sign and then “Devices.”
Step 2
Remove the battery tab labeled “Remove to Pair”. The hub will beep
when pairing is complete.
mounting*
The Iris Motion Sensor has 120◦ coverage. For best results when mounting
the motion sensor:
• Below 5 feet, battery door should face down.
• Above 5 feet, battery door should face up.
MOTION SENSOR
Iris Motion Sensor detects movement up to 15 feet and reads tempera-
ture, helping you monitor your home and protect your family.
lowe’s item #
690402
model
3326-L
user guide: iris motion sensor (3326-l) © 2015 lowe’s iris. all rights reserved.1 / 2
battery (cr-2)
reset button
slide out to open
led
front
below 5 ft.*
pairing battery
use case
• Save energy by turning o
lights in areas that aren’t
being used
• Receive alerts if motion is
detected while you’re away
• Create custom automatic
flood light and entry scenes
• Use time-based motion trig-
gers to light a path at night
compatibility
The Lowe’s IRIS Motion
Sensor is fully ZigBee HA 1.2
certified and will work with
other open ZigBee HA 1.2-
certified systems.
1.60”
41 mm
1.70”
43 mm

IRIS 3326-L Specifications

Power

rated voltage	3V
battery type	CR-2 (1x)
battery life	Up to 2 years

Operating Environment

operating temperature range	0° to 40°C
shipping/storage temperature range	-20° to 50°C
humidity range	0 to 90% RH (non-condensing)

Wireless Specifications

wireless protocol	ZigBee HA 1.2
transmission strength	+3 dBm
RF channels	16
range	130 ft. (40m) LOS

Summary

Key Features

Easy Mounting Options

Install on a wall or corner using included adhesive strips.

Remove-to-Pair Join Process

Device ships with battery pre-installed; pull tab to begin joining process.

Superior Output Power & Over-the-Air Updates

Detects motion up to 15-ft and supports seamless over-the-air updates.

Getting Started

Mounting

Use Case Scenarios

Product Compatibility

Approvals and Compliance

Troubleshooting Steps

Battery Replacement

Slide off battery cover, remove battery, replace with new CR-2 battery.

Factory Reset Procedure

Remove battery, hold reset button, reinsert battery for factory reset.

Additional Support Information

Technical Specifications

Power Details

Rated 3V, uses 1x CR-2 battery, with up to 2 years battery life.

Environmental Conditions

Operating temperature: 0° to 40°C.

Shipping and Storage

Temperature: -20° to 50°C, Humidity: 0 to 90% RH.

Certifications

FCC and ZigBee Alliance certifications.

Wireless RF Protocol

ZigBee HA 1.2 protocol, TX Strength +3 dBm, 16 channels, 130 ft range.