iRobot Roomba Combo Essential - Robot Care and Maintenance (Continued); Cleaning the Filter; Cleaning Charging Contacts and Sensors

For more information, visit global.irobot.com12
EN
Cleaning the 󷀎lter
1
Remove the bin. Open the bin door and remove
the 󷀎lter.
2
Remove debris with the cleaning brush.
3
Reinsert the 󷀎lter and place the bin back in
the robot.
NOTE: The 󷀎lter can be rinsed with water.
Make sure that it is completely dry before
reinstalling it. Frequent rinses are not
recommended.
Cleaning the charging contacts and sensors
Wipe the charging contacts and sensors with a clean, dry cloth.
CHARGING CONTACTS SENSORS
IMPORTANT: Do not spray cleaning
solution or water onto the sensors or
sensor openings.