iRobot Roomba Combo i8 User Manual

EN
Roomba Combo™ i8+ Owner’s Guide 6
Care and Maintenance
Part Care Frequency Replacement Frequency*
Bin Wash bin as needed -
Filter
Clean once a week (twice a week if you
have a pet).Do not wash.
Every 2 months
Full Bin Sensor Clean every 2 weeks -
Front Caster Wheel Clean every 2 weeks Every 12 months
Edge-Sweeping Brush and Multi-Surface
Brushes
Clean once a month (twice a month if
you have a pet)
Every 12 months
Sensors and Charging Contacts Clean once a month -
Mopping pad Clean after a mopping job After 30 washes
Wick cap Replace if dirty or shows wear -
Bags -
Bags should be replaced when prompted
by the LED indicator/app
Charging Contacts IR Window Once every month -
Blower Cover inside canister
Once every month (remove debris from
blower cover)
-
To keep your robot running at peak performance, perform the procedures on the following pages.
There are additional instructional videos in the iRobot Home App. If you notice the robot picking up less debris
from your floor, empty the bin, clean the filter, and clean the brushes.
Care and Maintenance Instructions
* Replacement frequency may vary. Parts should be replaced if visible wear appears.
Note: iRobot manufactures various replacement parts and assemblies. If you think you need a
replacement part, please contact iRobot Customer Care for more information.
1
2
3
Emptying the Bin
Press bin release button to remove bin.
Open bin door to empty bin.
Place bin back in the robot.

iRobot Roomba Combo i8 Specifications

General

Shape	Round
Product color	Black
Remotely operated	Yes
Dust container type	Bagless
Noise level	- dB
Dust capacity (total)	- L
Base station functions	Charging
HEPA filtration system	-
Floor surfaces supported	Hard floor
Number of filters	1 pc(s)
Battery capacity	- mAh