iRobot Roomba Combo - Page 21

For more information, visit global.irobot.com20
EN
Care and maintenance for your robot
To keep your robot at optimal performance, make sure you periodically perform the following care &
maintenance. There are additional instructional videos in the iRobot Home App. If you notice the robot picking
up less debris from your 󷀏oor, empty the bin, clean the 󷀎lter, and clean the brushes.
Part
Care Frequency
Replacement Frequency*
Bin
Wash bin as needed
-
Charging contacts
Clean every 2 weeks
Filter
Clean once a week (twice a week if you
have a pet). Do not wash
Every 2 months
Edge-sweeping brush and
Multi-surface Brushes
Clean once a month Every 12 months
Front caster wheel
Clean every 2 weeks
Every 12 months
Full bin sensor Clean every 2 weeks -
Sensor, Camera window, and
Pad shelf
Clean once a month -
Mopping pad Wash manually as needed
As needed
Dispose in household waste when
no longer usable
* Replacement frequency may vary. Parts should be replaced if visible wear appears. If you think you need a replacement part,
please contact iRobot Customer Care for more information.
Cleaning the 󷀎lter
1
Remove the bin. Remove the 󷀎lter by grasping
both ends and pulling out.
2
Remove debris by tapping the 󷀎lter against your
trash container.
3
Reinsert 󷀎lter with ridged grips facing out. Place
bin back in the robot.
IMPORTANT: The robot will not run if the
󷀎lter is not installed correctly. Replace
the 󷀎lter every two months.