For more information, visit global.irobot.com26
EN
3
Install a new bag, sliding the plastic card into
the guide rails. This will seal the bag so dust and
debris cannot escape.
4
Reinstall the Debris Bag Drawer and close the
door making sure it is completely closed.
IMPORTANT: To achieve optimal
performance with your robot and dock,
clean and/or replace your robot’s
lter as needed.
Washing the tanks
1
Use pull tab to open door. Remove the Clean
and Dirty tanks.
2
Lift the latch on the tanks to open.
3
Rinse the tanks using warm water. Mild soap and
a sponge may be used for stubborn debris.
To Next Page
Loading...
