Roomba
®
j7+ Owner’s Guide 7
EN
Cleaning the Filter
Remove the bin. Remove
the filter by grasping
both ends
and pulling out.
Remove debris by
tapping the filter
against your trash
container.
Reinsert filter with ridged grips facing out. Place bin back in
the robot.
1
2
3
Important: The robot will not run if the filter is not installed correctly.
Replace the filter every two months.
Cleaning the Full Bin Sensors
Wipe the inner sensors with a clean, dry cloth
Wipe the bin door with a clean, dry cloth.
2
3
Remove and empty the bin.
1
Closed Door
Opened Door
Clear any debris from the vacuum path.
4
To Next Page
Loading...
