Roomba
®
s Series Owner’s Guide 5
EN
Washing the Bin
Cleaning the Full Bin Sensors
Wipe the inner sensors with a clean,
dry cloth.
Make sure bin is completely dry. Then
reinsert filter and place the bin back
in the robot.
Remove the filter and wash the bin,
or gently clean the bin to ensure
the sensor ports are clean.
2
3
3
Important: Do not wash the filter. Remove
the filter before washing the bin.
Release the bin, remove the filter,
and open the bin door.
Remove and empty the bin.
1
1
Note: Bin is not dishwasher safe.
Use a small screwdriver to loosen the
screw holding the Corner Brush in place.
Cleaning the Corner Brush
1
2
Rinse the bin using warm water.
2
Full Bin
Sensors
Pull to remove the Corner Brush.
Remove any hair or debris, then
reinstall the brush.
To Next Page
Loading...
Need help?
General
