EN
Roomba™ j9 Owner’s Guide 2
CLEAN
Good Wi-Fi
®
Coverage
*Objects are not to scale.
4 ft (1.2 m)
from stairs
4 ft (1.2 m)
in front
1.5 ft (0.5 m)
both sides
Using Your Roomba® Robot Vacuum
Positioning the Home Base™ Charging Station Charging
• Place the robot on the charging station to activate the battery.
• The robot uses a small amount of power whenever it is on the charging station.
You can put the robot in a further-reduced power state when not in use. To put
your robot into reduced power standby mode, remove the dust bin and tap the
clean button 5 times. To exit reduced power standby mode, place your robot
on the charging station and tap the clean button. For more details on this
Reduced Power Standby Mode, refer to the FAQ page on our website.
• For long-term storage, turn off the robot by removing it from the charging
station and holding down the clean button for 3 seconds with one wheel off
the ground. Store the robot in a cool, dry place.
• Follow the step-by-step instructions to set up your Roomba.
• Set up Precision Vision Navigation™ to avoid obstacles in real time.
• Set an automatic cleaning schedule and customize cleaning preferences.
• Create smart maps to tell your robot where and when to clean.
Download the iRobot Home App and Connect to Wi
WARNING: To prevent
the risk of your robot
falling downstairs,
ensure that the
charging station is
placed at least 4 feet
(1.2 meters) away
from stairs.
Light Ring Spiral While Charging
White Spiral: charging
Red Spiral: charging, low battery
A solid white light will indicate the battery charge
percentage of your robot
When your robot is fully charged, the light ring
indicator will intermittently pulse white at the rear.
Note: Do not place
your Home Base™
in direct sunlight.
Ensure the area
around the dock
is free of clutter to
improve docking
performance.
Note: Your robot comes with a partial charge, but we recommend that
you charge the robot for 3 hours prior to starting the first cleaning job.
To Next Page
Loading...
Need help?
General
