IRON 647 - Certification

10 11
CERTIFICATION IDENTIFICATION
CONSTRUCTION CLASS: C
This boat is designed for voyages where conditions up to and including
wind force 6 (Beaufort scale) may be experienced (appr. 14 metres/second),
a significant wave height of 2 metres or more with a temporary peak wave
height of 4 metres). These conditions may be experienced during voyages
on large lakes, estuaries, and, in moderate weather conditions, on coastal
waters .
NB! The significant wave height is the average height of
the highest third of the wave profile, which roughly
corresponds to the wave height an experienced
observer makes of the sea. Single waves can be
twice as high.
NB! Do not exceed the maximum number of people.
Regardless of the number of people on the boat,
the total weight onboard may not exceed the
maximum permitted load. Always use the seats
on the boat.
NB! Never exceed the boat’s maximum load (see rating
plate). Distribute the load evenly and low so that
the boat’s balance is maintained, both in lateral
and longitudinal direction.
NB! No sign may be removed from the boat. If so, all
certifications will cease to apply immediately.
CERTIFYING INSTITUTE
Polish Ship Register SA
Gen. Jozefa Hallera 126
80-416 Gdansk
Poland
License no. CE 1463
www. prs.pl
PRODUCER
Järnbröderna AB
Bolshedens industriväg 40
427 50 Billdal
Sweden
www.ironboats.se
SE-IRNI ________
Järnbröderna AB, Bolshedens industriväg 40, 427 50 Billdal, Sweden
= Max 6 = Max 147,1 kW
= Max 800 kg
+ +
C
Järnbröderna AB, Bolshedens industriväg 40, 427 50 Billdal, Sweden
= Max 7 = Max 165,5 kW
= Max 880 kg
+ +
C
Järnbröderna AB, Bolshedens industriväg 40, 427 50 Billdal, Sweden
= Max 8 = Max 220,6 kW
= Max 960 kg
+ +
C