EQ switch:
Outdoor
Bluetooth mode. The AUX indicator light will flash when switch EQ on Aux
mode. USB indicator light will flash when switch EQ on USB mode.
Short press “ ” to increase volume, short press“ ” to decrease volume;
when its volume increase to maximum volume, you will hear “Beep” voice prompt.
Previous/ next song control:
Long press “ ” for 2 seconds to play next song, long press“ ” for 2 seconds to
play previous song on Bluetooth mode.
Operation on playing status:
Short press “ ” to pause playing, press again to start playing on Bluetooth mode;
Short press“ ” to mute, press again to un-mute on Aux mode.
Then choose “ IRONSIDE 2021 ” from devices list. You will hear voice prompt once it
connected, and the blue indicator light will long on. Then you can start to play your
music. Double press “ ” quickly to disconnect Bluetooth connection.
2. Bluetooth Connection
When Bluetooth connected successfully, speaker enter into Bluetooth handsfree status
automatically when you call at that time. When call coming, short press “ ” to pick
up, press again to hang up. Quick press twice to reject the call.
MODE switch:
Default Bluetooth Mode. Short press“ ” to switch Mode, Bluetooth Aux.
88888888888
IRONSIDE 2021
Bluetooth
My Device
03 04
3. Volume control
4. Handsfree call
Power Button
Status Indicator light
Power Button
Status Indicator light
TWS
TWS Indicator light
5. TWS Connection
Button
Remark: 1. Two speakers are needed, and both must be on Bluetooth mode.
2. Before TWS pairing, don’t pair any other device for speaker.
OPERATION GUIDE OPERATIONS GUIDE
If you have two “IRONSIDE 2021”, power on both of them, they will enter to Bluetooth
mode. Long press each of their “ ” button, the white TWS indicator light will ash.
Then they will connect with each other automatically. After they connected successfully,
both of their white indicator light will long on. The master model’s blue indicator light
will keep ashing, the sub-master model’s blue indicator light will long on.
Repeat the Point 2 Bluetooth Connection, connect the model with your phone. After
the two
models successfully connected with your phone, both of them will play music at the
same time.