2
Thank you very much for choosing an Ironton product! For future reference, please
complete the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire
manual to become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be
responsible for issues arising from modification. We strongly recommend this machine
not be modified and/or used for any application other than that for which it was designed.
If you have any questions relative to a particular application, DO NOT use the machine
until you have first contacted the distributor to determine if it can or should be performed
on the product.
For technical questions please call 1-800-222-5381.
INTENDED USE
This Ironton 14’’ Dry Cut Metal Saw is designed to cut various types of ferrous and
non-ferrous metals, including mild steel, structural members and steel studs. Cutting
hardened materials is not recommended, as this may reduce blade life and performance.
The machine is not recommend for cutting wood or other soft materials. This may also
reduce blade performance.
TECHNICAL SPECIFICATIONS
Item Description
Required voltage
120V
Frequency
60 Hz
Power input
15 Amps
Speed (no load)
1450 RPM
Disc diameter:
14 in.
Flange diameter.
41 in.
Disc bore size
10 in.
WARNING: To protect against hearing loss, hearing protection should be
worn when using this cut off saw.
GENERAL SAFETY RULES
1) Work area
a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create sparks, which may ignite the dust
or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do
To Next Page
Loading...