To Next PageTo Next PageWhat to do if my Ironton Fan fails to operate?
If your Ironton Fan isn't working, first, ensure that it is properly plugged into a working electrical outlet. If it's plugged in but still not working, turn the fan “OFF”, unplug it, and check for any obstructions. If you find something blocking the fan, carefully remove it. Then, plug the fan back in and turn it on, following the operation instructions.
Why is my Ironton 57936 Fan vibrating excessively?
Excessive vibration in your Ironton Fan can be due to a couple of reasons. It's possible that the nuts mounting the motor to the rear guard are not tight enough; torque the nuts to 35-40 in. lbs. Another cause could be an imbalance in the propeller due to accumulated dirt or debris. Try cleaning the propeller to resolve this.
Covers understanding instructions, common sense, operator qualification, product modification, and using the right tool.
Ensuring a clean, well-lit area, avoiding fire/explosion risks, electrical contact, and keeping bystanders clear.
Focuses on operator alertness, proper dress, personal protective equipment (PPE), and maintaining footing and balance.
Guidance on proper fan operation, checking for damage, switch safety, power disconnection, storage, accessories, and guards.
Warnings against exposure to water, rain, or use near water sources, and precautions for unplugging in damp areas.
Covers grounding, voltage compatibility, flammable fumes, indoor-only use, damaged cords/plugs, and cord placement.
Highlights the rotating blade hazard and the importance of never operating the fan without the guard in place.
Mandates grounding for shock protection, prohibits plug modification, and advises consulting electricians.
Details the use of 3-wire cords and 3-prong plugs with properly grounded outlets for safety.
Emphasizes using proper, well-wired, undamaged extension cords and protecting them from damage.
Explains how cord gauge must increase with distance from the power source to maintain voltage and prevent damage.
Details exclusions from the warranty, such as normal wear, abuse, neglect, misuse, and improper maintenance.
Outlines requirements for warranty claims, including retaining receipts and contacting customer service.
Specifies that product replacement or refund is the sole remedy and limits liability for consequential damages.
States that using the product for purposes other than specified is at the user's own risk.
Defines the legal jurisdiction and rights pertaining to the limited warranty, varying by state.
Covers understanding instructions, common sense, operator qualification, product modification, and using the right tool.
Ensuring a clean, well-lit area, avoiding fire/explosion risks, electrical contact, and keeping bystanders clear.
Focuses on operator alertness, proper dress, personal protective equipment (PPE), and maintaining footing and balance.
Guidance on proper fan operation, checking for damage, switch safety, power disconnection, storage, accessories, and guards.
Warnings against exposure to water, rain, or use near water sources, and precautions for unplugging in damp areas.
Covers grounding, voltage compatibility, flammable fumes, indoor-only use, damaged cords/plugs, and cord placement.
Highlights the rotating blade hazard and the importance of never operating the fan without the guard in place.
Mandates grounding for shock protection, prohibits plug modification, and advises consulting electricians.
Details the use of 3-wire cords and 3-prong plugs with properly grounded outlets for safety.
Emphasizes using proper, well-wired, undamaged extension cords and protecting them from damage.
Explains how cord gauge must increase with distance from the power source to maintain voltage and prevent damage.
Details exclusions from the warranty, such as normal wear, abuse, neglect, misuse, and improper maintenance.
Outlines requirements for warranty claims, including retaining receipts and contacting customer service.
Specifies that product replacement or refund is the sole remedy and limits liability for consequential damages.
States that using the product for purposes other than specified is at the user's own risk.
Defines the legal jurisdiction and rights pertaining to the limited warranty, varying by state.
General