Need help?Do you have a question about the Ironwood COMPACT Series and is the answer not in the manual?
Technical specifications and model details of the sliding table saw.
Physical dimensions and cutting capacities of the machine.
Key features and components of the sliding table saw, with visual identification.
Information regarding saw blade sizes and running directions.
Details and specifications for the riving knife system.
Declared noise emission values and safety advice regarding machine noise.
Instructions and warnings for safely transporting the machine.
Assembly and adjustment procedures for the sliding table.
Assembly and adjustment steps for the crosscut table.
Instructions for assembling and adjusting the crosscut fence.
Procedures for assembling and adjusting the rip fence.
Steps for assembling the main table and width extension tables.
Installation guide for simple and lux type saw guards and dust collection.
Assembly instructions for the miter fence unit.
Adjustment procedure for the riving knife.
Steps for changing the main saw blade and adjusting height/tilt.
Operation and changing procedures for the scoring saw unit.
Explanation and adjustment of the sliding table protect switch.
Instructions for safe power connection and wiring.
Explanation of the control panel buttons and their functions.
Daily and periodic maintenance tasks for the sliding table.
Cleaning and lubrication procedures for the angle slide rail.
Procedures for performing regular safety checks on the machine.
To Next Page
General