Need help?Do you have a question about the Irradio RC-184 and is the answer not in the manual?
General| Brand | Irradio |
|---|---|
| Model | RC-184 |
| Category | Clock Radio |
| Language | English |
Connect the power cord to a wall outlet. The clock display will blink upon power interruption and restoration.
Press and hold the Time Set button (3) and the Hour (7) or Minute (8) button to set the correct time.
Turn on the radio using the Auto/Off/On selector (1), select the band (11), tune the station (12), and adjust volume (2).
Set the radio to turn off automatically after a desired period, up to 59 minutes, using the SLEEP button (6).
Program the alarm by pressing the Alarm Set button (4) and adjusting hours/minutes (7/8). Set Auto/On/Off (1) to 'Auto'.
Program a buzzer alarm by following the radio alarm steps with volume deactivated.
Press the SNOOZE button (10) during an alarm to temporarily silence it for 9 minutes.
Insert a 9-Volt battery to maintain time and alarm settings during power outages.
Avoid exposure to rain, humidity, liquids, and ensure proper ventilation.
Information regarding the disposal of electrical and electronic equipment according to the WEEE directive.
Appliance complies with EMC (89/336/EEC) and Low Voltage (73/23/EEC) directives.
One-year warranty for manufacturing defects, excluding wear parts and improper use.
Requires fiscal document for purchase date proof, and intact serial number/model.
To Next Page