Connect up to Eight Sprinklers
per Controller Cable
Connect sprinklers with Sprinkler Cables and Cable Tees
Digital Zones 1-8:
Wire Controller Cable to “iG 1-8” and “Common”
Locate Sprinklers numbered 1-8 in the order you want them to run on the landscape
Digital Zones 9-16:
Wire second Server Cable to “iG 9-16” and “Common”
Locate Sprinklers numbered 9-16 in the order you want them to run on the landscape (after 1-8)
DO Install Cables in a trench or pull a parallel run of 1 inch pipe as conduit for Cables
DON’T pull IrriGreen Cables
DO loop excess Cable inside a valve box adjacent to the head, buried below turf
DON’T cut and splice IrriGreen Cables
DO branch out your Cables in different directions with Tees
Use a 6FT Plug-n-Play Cable Tee; use supplied End Plug to seal the last Sprinkler connector plug
DO add a second Controller Cable if branching off immediately from the Server
DO protect all Digital Sprinkler connections with small valve boxes, buried below turf
To Next Page
Loading...