IrriGreen 2 - System Design (1 of 2); Optimal Head Placement Strategy; Initial Zone Setup

System Design (1 of 2)
One Head per Zone
Place Head to Reach Farthest Corner, 25-35 Feet
Exact placement
not critical as you
can program the
head to the shape
of the zone
Don’t overlap
sprays or zones
Installation hint:
Walk in from the
corner with a wheel
and place a flag at
25-30’ for head
placement.
NOTE: The zone
start up point
(Position 1)
must be set at
least 10 feet so
the head has
enough
flow/pressure to
fully “pop up”.
After head is
fully popped up,
OK to set points
as short as 5
feet.
6