Irrigreen System Requirements
Good flow, Constant pressure, Clean Water
• 8 gpm Lower flow = shorter throw)
• Important to check flow, some homes have 3/4” pipe inside the home,
which restricts flow to the irrigation system, lessening throw
• 40 - 80 psi (Any constant pressure between 40 - 80 psi)
• Well systems require a constant pressure pump or regulated constant pressure supply, e.g. with
a pressure regulating valve (PRV) set below the lowest pump setting
• Filter required for any water source with particulates (sand, grit, lake water)
500 Micron filter (similar to drip systems)
4
To Next Page
Loading...