Irritrol LIFE - Mounting template; Mounting visualization

15
IRRITROL Decoder Systems
c) connected but nothing happens. Start your
browser. Go to the IP address 10.10.10.1 to show
the product web page.
d) connected to a dierent access point. If this
happens, disable mobile data and automatic
connection to other WIFI access points and try
again.
Now open the ‘System’/’Wifi’ menu. If no ‘Ssid’ is
shown, or you want to change it:
1) press thebutton to scan for WIFI networks.
2) Press the ‘Accesspoint’ to view a list.
3) Click on your chosen access point..
4) Enter the ‘Password’.
5) Press ‘Connect’.
You will lose your direct connection if the interface
changes WIFI channel when connecting to the
SSID.
The blue LED is on while trying to connect to an
access point. It blinks blue when AP is connected
and while connecting to internet and servers.
It then turns green when all connections are
established.
E. Mounting template
Template for drilling holes for wall mount.
F. Mounting visualization
Picture of interface with mounted wires, cables
and strain reliefs.