EasyManua.ls Logo

Irvine Tutor 40 II - User Manual

Irvine Tutor 40 II
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTION MANUAL
Items required to complete the Tutor 40 II
Glow Engine version Requires
.40-.46 2-Stroke engine
4 Channel Proportional Radio Control System
Model Engine Fuel
Model Engine Starter and Glow Plug Battery (for Glowstart)
Hand Tools and Adhesive
Fuel tubing and propeller suitable for engine
Electric Conversion Requires
KMS Quantum 4120/05 Brushless Motor
Arrowind 60amp Electronic Speed Controller (ESC)
Intellect 4S 4000 25C Li-Po Flight Battery
4 Channel Proportional Radio Control System
12 x 6 Propeller
Tutor 40 II Specification:
Wingspan .........................................62 3/8” (1635mm)
Length ..............................................47 1/4” (1200mm)
Engine ...........................40-.46 2-Stroke (Not included)
Motor ....................................... 700 watt (Not included)
Suitable for Electric
or I.C. Engine Power
Congratulations on the purchase of your
Irvine Tutor 40 II Radio Control Model
Aircraft. Please take some time to carefully
read these instructions before assembly
and your first flights.
The Irvine Tutor 40 II is an ideal first model
or aileron trainer she will reward you with
many hours of superb flying and enjoyment!
Part No: A-IRVTUT40/2
Question and Answer IconNeed help?

Do you have a question about the Irvine Tutor 40 II and is the answer not in the manual?

Irvine Tutor 40 II Specifications

General IconGeneral
BrandIrvine
ModelTutor 40 II
CategoryToy
LanguageEnglish