ISAN MINI PW User Manual

MINI PW CONTROLLER
(Power version)
6
Technical specifications
Operating voltage
230 V AC ±10% 50 Hz
Maximum el. input
2 000 W
Insulation class
Class I
Protection class
IPX4
Operating temperature
0 ÷ 50 °C
Storage temperature
-20 ÷ 70 °C
Operating humidity
0 ÷ 85% at 25 °C (without condensation)
Output control
Analogue turning knob (linear)
Output setting range
20 ÷ 100% of nominal output
The installation must be performed in a professional manner and in accordance with standards
applicable in the country of installation.
PRODUCT DISPOSAL INSTRUCTIONS - THE EUROPEAN UNION
The crossed out symbol of a bin displayed on your product is a reminder that,
within the European Union, all electric and electronic products must be
collected separately at the end of their service life. Do not dispose of these
products as unsorted municipal waste. Bring these products to a waste
collection facility to prevent environmental or health damage due to
uncontrolled waste disposal and to promote sustainable utilization of material
resources. Disposal information can be obtained from product vendors, local
waste management authorities or relevant national manufacturers.
The manufacturer disclaims all liability and responsibility for any inaccuracies
contained in this document due to printing or translation errors. The manufacturer
reserves the right to make any changes to its products deemed to be necessary or
beneficial. This document and any part thereof may not be copied, altered or
reproduced without the written approval of ISAN Radiátory s.r.o.

ISAN MINI PW Specifications

General

Brand	ISAN
Model	MINI PW
Category	Controller
Language	English