______________________________________________________________________________________
Revision NEW APECS™ 2.7 9 of 19
Date: 10 July 2008
APECS ™ OPERATIONAL
INSTRUCTIONS (v. 2.7)
loop to maintain a
manually fixed set point based off of the planned diving operation.
The secondary hand set displays the average PO2, individual sensor outputs,
and the SYSTEM MONITOR (heart beat) along with the ISC logo. The
secondary has the following menu options; MAIN, SYSTEM MONITOR,
TEMPERATURE, BL ENBL/DISBL, HUD ENBLE/DISBLE/TEST, HUD
BRIGHTNESS, KEEP BACKLITE ON, DISPLAY POWERSAVE,
METRIC/IMPERIAL, CALIBRATE, SET OXYGEN PERCENTAGE, and
ALITIUDE.
The diver may scroll through the menus and access the menu options the same
way as with the primary hand set. The diver will notice one difference in the
SYSTEM MONITOR in that the NORM battery voltage only is displayed and not
the LOAD voltage. The secondary does not operate the solenoid. The operation
of the MAIN, SYSTEM MONITOR, BL ENBL/DISBL, KEEP BACKLITE ON, and
DISPLAY POWER SAVE menus are as described above for the primary
handset.
TEMPERATURE: The TEMPERATURE screen displays only loop temperature
as the loop sensor is located in the head. The water temperature sensor is
located in the primary handset.
To Next Page
Loading...
Need help?
General