To Next PageTo Next PageWhat to do if my ISE Treadmill running machine can't start?
If your ISE Treadmill isn't starting, verify that the plug is properly inserted, the power switch is on, the safety switch is removed, and the overload protector isn't activated.
Why is my ISE SY-T1507 running belt skidding?
If the running belt on your ISE Treadmill is skidding, adjust the running belt tightness as described in the instruction manual.
What to do if ISE Treadmill running belt is off tracking?
If the running belt on your ISE Treadmill is off track, adjust the running belt centering according to the instruction manual.
What to do if my ISE Treadmill is making abnormal sounds?
If your ISE Treadmill is producing abnormal sounds, check if the machine screws are loose and whether the running belt needs lubrication.
What does E5 error mean on my ISE Treadmill and how to fix it?
The E5 error on your ISE Treadmill indicates that exceeding the rated load leads to excessive current. To resolve this: 1. Adjust the running machine and reboot operation. 2. Check the motor for overcurrent sounds or burning smells—if present, replace the motor. 3. Inspect the controller for burning smells—if present, replace the controller. 4. Ensure the power supply voltage meets specifications; if not, re-test with the correct voltage.
What does E6 error mean on my ISE SY-T1507 and how can I fix it?
The E6 error on your ISE Treadmill may be caused by the power supply voltage being below 50% of the normal voltage. Please use the correct voltage specifications to re-test. Also, check the controller for any peculiar smells and replace it if necessary. Finally, ensure the motor line is properly connected; reconnect it if needed.
How to fix E1 error on ISE SY-T1507?
The E1 error on your ISE Treadmill means that electronic control and electronic meter communication is blocked. Check every section of the connection from the electronic meter to the down control communication line, to ensure that the core is completely inserted. Check whether the connection line between the electronic watch and the controller is damaged, and replace the connecting line.
What does E2 error mean on ISE SY-T1507 and how to solve it?
The E2 error on your ISE Treadmill indicates that no speed sensor signal was detected for 3 seconds. Check if the sensor plug was not plugged in or damaged, plug it in or replace the sensor.
How to troubleshoot E3 error on ISE SY-T1507 Treadmill?
To troubleshoot the E3 error on your ISE Treadmill, check whether the motor line is connected and reconnect the motor line. Also, check whether the controller has a peculiar smell and replace the controller if it does.
General| Motor Power | 1.5 HP |
|---|---|
| Speed Range | 1-14 km/h |
| Display | LCD |
| Foldable | Yes |
| Programs | 12 preset programs |
| Incline | Manual, 3 levels |
| Maximum User Weight | 120 kg / 264 lbs |
| Running Area | 123 x 42 cm |
