iseg SHQ Series - Operation; Front Panel

3 Operation
3.1 Front panel
Option IWP: Hardware current limit with 10-turn potentiometer
The upper figure shows the panel for the SHQ module in the standard version with 10 percent switches for voltage and current
limit.
The front panel for modules with option IWP ″Hardware current limit setting with 10-turn potentiometer″ is shown in the lower
figure.
SHQ series |Last changed on: 04.07.2017| www.iseg-hv.com 8/16
Figure 2: Front panel
Figure 3: Front panel with option IWP