Iseki SRA950A - Important Safety Precaution for Ride-On Bush Cutter

IMPORTANT SAFETY PRECAUTION FOR RIDE-ON BUSH CUTTER
1
1.
When operating your Ride-on Bush Cutter on slope or bumpy area, be sure to avoid sudden
leaving, sudden stop, sudden turning and U-turn.
2.
Be sure to inspect your Ride-on Bush Cutter before operation. In particular, service the im-
portant safety parts (such as the brake) to keep them in a good condition.
3.
When operating your Ride-on Bush Cutter on the road shoulder or soft ground, excise due
caution without fail, otherwise it may fall down.
4.
When operating your Ride-on Bush Cutter or working with it, make sure that the protective
covers are installed.
5.
Be sure to stop the engine and apply the brake before cleaning, inspecting, adjusting or re-
fueling the machine.
6.
When working together with other person(s), give cues each other to make sure of safety
around the Ride-on Bush Cutter.
Recite the above points every time before operating the machine.
The above lists the key safety precautions to which you must pay attention so as to ensure safe
operation. There are other instructions you should observe, which are indicated by the symbol
and word “IMPORTANT“, and explained in the relevant sections of the main text. Read
these instructions carefully and observe them without fail.
IMPORTANT SAFETY PRECAUTION FOR RIDE-ON BUSH CUTTER