Iseki SSM48 User Manual (English)

Other manuals for Iseki SSM48

Questions and Answers:

J
jenniferchambersSep 9, 2025
What to do if Iseki SSM48 Lawn Mower Accessories are not mowing grass?
- M
  Michael VazquezSep 9, 2025
  If your Iseki Lawn Mower Accessories are not mowing the grass effectively, several issues could be the cause. Check if the drive belt is slipping or broken; adjust the belt tension spring or replace the belt if needed. Replace a broken tension spring with a new one. Adjust the mower mounting if the traveling speed is too fast. Ensure the engine is running at full throttle. Replace worn or broken blades and make sure the blades are installed correctly.
A
Andrew LeeSep 12, 2025
Why is the engine output too low on my Iseki SSM48 Lawn Mower Accessories?
- C
  Charles HowellSep 12, 2025
  If your Iseki Lawn Mower Accessories are producing too low engine output, try mowing at full throttle and reduce your traveling speed. Clean any foreign matter caught between the blade and blade support, or any foreign matter caught in a pulley. If the engine is defective, consult your dealers.
B
bcoxSep 13, 2025
What causes Iseki SSM48 Lawn Mower Accessories to peel off turf?
- W
  wfranklinSep 13, 2025
  If your Iseki Lawn Mower Accessories are peeling off turf in some places, adjust the cutting height with gauge wheels if it's too low. Adjust the mower mounting if the mower isn't parallel to the ground. Turn slowly to avoid peeling. If the ground is too bumpy, shift the mowing direction. Adjust the tire inflation to the specified value if it's too low.

Iseki SSM48 Specifications

General

Brand	Iseki
Model	SSM48
Category	Lawn Mower Accessories
Language	English

Summary

Chapter 1. For Safe Operation

1-1. Safety Labels

Information on safety labels applied to the mower.

1-2. Position of the Safety Labels

Location and illustration of safety labels on the mower.

1-3. Maintenance of the Safety Labels

Guidelines for maintaining the visibility and condition of safety labels.

Chapter 2. General Information

2-1. Introduction

Overview of the operator's manual and machine usage.

2-2. Machine Identification

Details on identifying the mower by model and serial numbers.

Chapter 3. Specifications

Chapter 4. Name of Major Components

1) For TM3240, 3200, 3160 Tractors

Identification of major components for specific tractor models.

Chapter 5. Installation on the TM Tractor

5-1. Before Installation

Preparatory steps before installing the mower on the tractor.

5-2. Installation of the Bracket and Cylinder on the Tractor

Steps for installing brackets and the hydraulic cylinder.

5-3. Installation of the Linkage on the Tractor

Procedure for connecting the tractor linkage system.

5-4. Installation of the Mower Deck

Steps for attaching the mower deck to the tractor.

5-5. Installation of the Drive Shaft

Procedure for connecting the drive shaft.

5-6. Link Adjustment

Adjusting the linkage for proper mower operation.

5-7. Before Installation

Preparatory steps before installation on different tractor models.

5-8. Installation of the Bracket and Cylinder on the Tractor

Installing brackets and cylinder for specific models.

5-9. Installation of the Linkage on the Tractor

Connecting the linkage for specific tractor models.

5-10. Installation of the Mower Deck

Attaching the mower deck to different tractor models.

5-11. Installation of the Drive Shaft

Connecting the drive shaft for different tractor models.

5-12. Link Adjustment

Adjusting linkage for specific tractor models.

5-13. Installation of the Height Adjuster

Installing the mechanism for adjusting cutting height.

Chapter 6. Installation on the TH Tractor

6-1. Before Installation

Preparatory steps for TH tractor installation.

6-2. Installation of the Bracket and Cylinder on the Tractor

Installing brackets and cylinder on TH tractor.

6-3. Installation of the Linkage on the Tractor

Connecting linkage on TH tractor.

6-4. Installation of the Mower Deck

Attaching mower deck to TH tractor.

6-5. Link Adjustment

Adjusting linkage on TH tractor.

6-6. Installation of the Height Adjuster

Installing height adjuster on TH tractor.

Chapter 7. Mower Operation

7-1. Before Operation

Pre-operation checks and familiarization.

7-2. Cutting Height Adjustment

Procedure for adjusting the cutting height.

7-3. Starting Mowing Operation

Steps for starting the mower and beginning mowing.

7-4. Stopping the Mower

Procedures for safely stopping the mower.

7-5. Emergency Stop

Actions to take in case of an emergency.

7-6. Efficient Mowing

Tips and methods for effective mowing.

Chapter 8. Inspection and Service of Each Part

8-1. Inspection and Replacement of the Gear Box

Procedures for checking and servicing the gear box.

8-2. Inspection and Replacement of the Drive Belt

How to inspect and replace the drive belt.

8-3. Inspection and Replacement of the Blades

Inspecting and replacing mower blades.

8-4. Inspection of Gauge Wheels

Checking the condition and function of gauge wheels.

8-5. Inspection of Rollers

Ensuring rollers are functioning correctly.

8-6. Cleaning Under the Belt Cover

How to clean the area under the belt cover.

Chapter 9. Lubricating and Greasing Points

1) For TM3240, 3200, 3160 Tractors

Lubrication and greasing points for specific tractor models.

Chapter 10. Disassembly and Reassembly

10-1. Gear Box

Instructions for disassembling the gear box.

10-2. Backlash Adjustment

Procedure for adjusting gear box backlash.

Chapter 11. Storing of the Mower Deck

Chapter 12. Troubleshooting

Chapter 13. Packing Parts List

1) For TM3240, 3200, 3160 Tractors

List of parts included in the package for specific tractor models.

Related product manuals

Iseki SSM48 User Manual

Table of Contents

Other manuals for Iseki SSM48

Questions and Answers:

Iseki SSM48 Specifications

Summary

Chapter 1. For Safe Operation

1-1. Safety Labels

1-2. Position of the Safety Labels

1-3. Maintenance of the Safety Labels

Chapter 2. General Information

2-1. Introduction

2-2. Machine Identification

Chapter 3. Specifications

Chapter 4. Name of Major Components

1) For TM3240, 3200, 3160 Tractors

Chapter 5. Installation on the TM Tractor

5-1. Before Installation

5-2. Installation of the Bracket and Cylinder on the Tractor

5-3. Installation of the Linkage on the Tractor

5-4. Installation of the Mower Deck

5-5. Installation of the Drive Shaft

5-6. Link Adjustment

5-7. Before Installation

5-8. Installation of the Bracket and Cylinder on the Tractor

5-9. Installation of the Linkage on the Tractor

5-10. Installation of the Mower Deck

5-11. Installation of the Drive Shaft

5-12. Link Adjustment

5-13. Installation of the Height Adjuster

Chapter 6. Installation on the TH Tractor

6-1. Before Installation

6-2. Installation of the Bracket and Cylinder on the Tractor

6-3. Installation of the Linkage on the Tractor

6-4. Installation of the Mower Deck

6-5. Link Adjustment

6-6. Installation of the Height Adjuster

Chapter 7. Mower Operation

7-1. Before Operation

7-2. Cutting Height Adjustment

7-3. Starting Mowing Operation

7-4. Stopping the Mower

7-5. Emergency Stop

7-6. Efficient Mowing

Chapter 8. Inspection and Service of Each Part

8-1. Inspection and Replacement of the Gear Box

8-2. Inspection and Replacement of the Drive Belt

8-3. Inspection and Replacement of the Blades

8-4. Inspection of Gauge Wheels

8-5. Inspection of Rollers

8-6. Cleaning Under the Belt Cover

Chapter 9. Lubricating and Greasing Points

1) For TM3240, 3200, 3160 Tractors

Chapter 10. Disassembly and Reassembly

10-1. Gear Box

10-2. Backlash Adjustment

Chapter 11. Storing of the Mower Deck

Chapter 12. Troubleshooting

Chapter 13. Packing Parts List

1) For TM3240, 3200, 3160 Tractors

Related product manuals