Isel EuroScooter2 - EC Declaration of Conformity in Accordance with the 2006;42; EC Directive Annex II a; Bürgermeister-Ebert-Straße 40; D-36124 Eichenzell

9
EC Declaration of conformity in accordance with the 2006/42 / EC directive annex II 1.A
The Manufacturer isel Germany AG
Bürgermeister-Ebert-Straße 40
D-36124 Eichenzell
Hereby declares that the following product
Product name:
EuroScooter2
Type:
EuroScooter2 ES 135
Art.-Nr.: 440703
EuroScooter2 ES 175
Art.-Nr.: 440704
Serial Number:
the provisions of the above Directive, including any amendments thereto is equivalent at the time of declaration.
The following harmonized standards were applied:
EN ISO 12100:2010
Safety of machinery - General principles for design - Risk assessment and risk reduction.
DIN EN 60204-1:2019-06;
VDE 0113-1:2019-06
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
Safety of machinery - Electrical equipment of machinery - Part 1: General requirements
The technical documentation for this machine has been prepared in accordance with Part A of Annex VII. The manufacturer agrees to
this technical documentation to national authorities upon request.
Authorized representative for the compilation of the technical documentation is: Mr. Rene Saal
place, date: Eichenzell, 17. Juli 2018
____________________________
Werner Kister, Managing board