Isel ICP 4030 - Manual Introduction and Safety Overview; About This Manual

Ó
isel Ê«>VÌÊµÕ«iÌÊ*
On this Manual
Various symbols are used in this Manual to quickly provide you with brief information.
Danger Caution Note Example Additional
Information
© isel Germany AG 2009
All rights reserved.
Despite all care, printing errors and mistakes cannot be ruled out completely.
Suggestions for improvement and notes on errors are always welcomed.
Ãi machines and controllers are CE compliant and are marked accordingly.
Any other machine parts and components subject to the CE safety guidelines may not be
commissioned unless all relevent standards are fulfilled.
isel Germany shall not accept any liability for any modifications on the device by the
customer.
The limit values specified in the Certificate of Conformity only apply to the original
configuration from works.
Manufacturer: isel Germany AG
Bürgermeister-Ebert-Str. 40
D-36124 Eichenzell
Fax: +49-6659-981-776
E-Mail: automation@isel.com
http://www.isel.com