4
Operating Instructions
Please read and save these operating instructions, heed all warnings, and follow all
instructions. ISKN shall not be liable for any claim if you fail to comply with these
operating instructions.
1. Do not use the Product near water or moisture.
2. Clean only with a dry cloth.
3. Do not install the Product near any heat sources, such as radiators, heat registers, stoves,
or any other appliances (including amplifiers) that produce heat.
4. Protect the power cord from being walked on or pinched, especially at plugs or
convenience receptacles and where it exits the Product.
5. Use only those accessories specified by the manufacturer.
6. Unplug the Product during storms or during long periods of non-use.
7. Refer all servicing to qualified service personnel. Servicing is required when the Product
has been damaged in any way (if the power cord or plug is damaged; liquids spill on the
Product; objects fall on the Product; the Product is exposed to rain or moisture; the Product
malfunctions; the Product is dropped, etc.).
8. Operating Environment: Operating the Slate outside of the following temperature ranges
may affect its performance:
- Operating temperature: 0 to 35 °C (32 to 95 °F)
- Storage temperature: -15 to 40 °C (5 to 104 °F)
- Relative humidity: 5% to 85%
- Operating altitude: 0 to 2,000 meters (0 to 6,500 feet)
It is extremely important to follow these operating conditions. For best performance, keep
away from any magnetic interference, such as magnets, motors, speakers, and telephones.
The Slate is not designed to function on transportation vehicles (trains, cars, planes…) due
to the significant presence of electromagnetic waves.
To Next Page
