Do you have a question about the Islandaire EZ09 and is the answer not in the manual?
Critical safety warning regarding gas leaks and fire hazards.
Benefits for occupants regarding energy efficiency and comfort.
Ease of fitting Islandaire units into existing wall sleeves.
Energy efficiency ratings and coil performance.
Explanation of the model number configuration for ordering.
Detailed cooling performance data, including BTUH, AMPS, and EER by model.
Detailed heating performance data, including BTUH, WATTS, and efficiency by model.
Required clearances around the rear and sides of the unit outdoors.
Required clearances around the front and sides of the unit indoors.
Critical safety precautions for qualified personnel and operation.
Clearance and positioning rules for vent terminals in the US.
Specific venting rules and exceptions for Canada.
Requirements for framing and preparing the wall opening.
Instructions for block walls and panel/window walls.
Procedure for inserting the chassis into the wall sleeve.
Connecting the gas supply and sizing considerations.
Procedure for cleaning and replacing the air intake filter.
Crucial safety precautions for unit operation.
Steps for initiating heating operation and general use.
How to properly shut down the unit for extended periods.
Schematic showing electrical connections for the base model.
Wiring for optional remote thermostat systems.
How sensors monitor conditions and display error codes.
Table listing error codes, diagnoses, causes, and notes.
| Brand | Islandaire |
|---|---|
| Model | EZ09 |
| Category | Gas Heater |
| Language | English |
Loading...