iSmartAlarm iCamera User Manual

Quick Installation Guide
Get Started
Easy as One, Two, Three
Step 1 – Getting Started
• Download the “iSmartAlarm Home Security System” application from your phone’s App
store.
• Connect the CubeOne™ to your router and into your wall outlet according to the picture
provided below.
• Power on the CubeOne™ and wait for the booting process to finish (it will automatically
boot, and should take 1-2 minutes).
o
You will know the booting process is finished when the CubeOne’s white LED light
“breathes” (i.e. flashes slowly)
power adapter
router
(not included)
(bottom)
1 2 3 4WAN

iSmartAlarm iCamera Specifications

General

Brand	iSmartAlarm
Model	iCamera
Category	Security System
Language	English

Summary

Get Started with iSmartAlarm

Step 1: Initial Setup and Connection

Download the app, connect CubeOne to router and power, wait for booting until LED breathes.

Step 2: User and Device Registration

Launch app, register user with SMS verification, and ensure all devices are registered in settings.

Step 3: Device Placement and Readiness

Place sensors in appropriate locations. Your iSmartAlarm system is now ready to use.