iSmartAlarm Smart Switch User Manual

1. For indoor use only.
2. Make sure appliances are o before plugging into
the Smart Switch.
3. Do not use this product near water or in locations
that may cause the Smart Switch to become wet.
4. The maximum current for the Smart Switch is 10A
and the maximum power capacity is 2000 Watts.
Exceeding this capacity may damage your Smart
Switch.
5. Avoid placing product near areas of high radiation
or heat such as radiators or stoves.
6. When unplugged, clean with a soft and dry cloth.
Do not use abrasive or solvent-based cleaners.
Quick Installation Guide
EN
The Smart Switch allows you to create scheduled
tasks and turn on or o home appliances from
anywhere using your smartphone.
iSmartAlarm™ is a trademark of iSmart Alarm, Inc.
iPhone is a trademark of Apple Inc,
Registered in the U.S. and other countries.
©2014 iSmart Alarm, Inc. All rights reserved.
Power button
Product Overview
How to Connect Your iSmartAlarm™
Smart Switch
1. Plug the Smart Switch into a power outlet and
make sure the power button’s LED is solid white.
iSmartAlarm™ CubeOne.
iPhone running iOS 6.0 or later, Android phone
running version 4.0 or later.
Safety Instructions
System Requirements
6. For more information，please visit
https://www.ismartalarm.com/
5. After the Smart Switch
is found, press the Add
button to add it to
your system.
4. Pull down the Safety
Monitor page and tap
on the Add Devices
button.
3. Select Safety Monitor
at the top.
2. Launch the iSmartAlarm
app and go to the Monitor
page.

iSmartAlarm Smart Switch Specifications

General

Type	Smart Switch
Compatibility	iSmartAlarm system
Connectivity	Wi-Fi
Maximum Load	15A
Control Method	App, Voice
Power Input	AC
Operating Temperature	0°C to 40°C

Summary

Product Overview

Smart Switch Functionality

The Smart Switch enables scheduled tasks and remote control of home appliances via smartphone.

Connecting Your Smart Switch

Initial Plug-in and Power Indicator

Plug the Smart Switch into a power outlet and verify the power button LED is solid white.

Launch iSmartAlarm App and Navigate

Open the iSmartAlarm app and proceed to the Monitor page.

Select Safety Monitor

Tap on the 'Safety Monitor' option located at the top of the app screen.

Add Device via Pull-Down Menu

Pull down the Safety Monitor page and select the 'Add Devices' button.

Add Smart Switch to System

Once the Smart Switch is detected, press the 'Add' button to integrate it into your system.

System Requirements

Safety Instructions

Usage and Environmental Precautions

For indoor use only; avoid water, high radiation, or heat sources like radiators.

Appliance and Electrical Limits

Ensure appliances are off before plugging in; max current 10A, max power 2000 Watts.

Cleaning Guidelines

Clean with a soft, dry cloth when unplugged. Do not use abrasive or solvent-based cleaners.