iSNATCH HeyCam 67.6894.18

1
HD 720P IP WI-FI 2.4GHZ MOTORIZED INDOOR CAMERA COMPATIBLE
WITH AMAZON ALEXA AND GOOGLE HOME - CODE 67.6894.18
WARNINGS
• Attention: the camera supports only 2.4GHz Wi-Fi connection. It does NOT support 5GHz band
• The camera is not waterproof, so it is not suitable for outdoor installations. It is an electronic device. It is
recommended to protect the camera and the power cable (the power plug does not have an IP protection
rating, so it must be 100% protected to avoid short circuits).
• The warranty will not cover damage due to water infiltration inside.
• In the event that the camera is in areas subject to significant changes in light / brightness, it will be necessary
to wait a few seconds for the image to return perfectly, the time necessary for the automatic recovery of the
light sensitivity. If the camera is oriented from a dark area towards highly luminous areas, the shooting of
those areas may appear very blurry and white, but also with a green color tone. It is not a defect but a
peculiarity of the built-in IR LEDs that will tend to activate as the twilight sensor inside the camera will start
working. It will therefore be necessary to orient the camera in another way. Also bear in mind that the camera
in the dark will shoot in black/white.
• If you have not used the system for a long time, disconnect the camera power supply.
• Do not cut the power supply cord of the unit to adapt it to another power source.
• Check that the power supply and the cable coming out of it are not damaged; otherwise, disconnect the
power supply and contact your dealer for replacement with an equivalent model.

iSNATCH HeyCam 67.6894.18 Specifications

General

Brand	iSNATCH
Model	HeyCam 67.6894.18
Category	Security Camera
Language	English

Summary

Warnings and Precautions

Safety and Operational Warnings

Key warnings regarding Wi-Fi, waterproofing, power supply, and environmental conditions.

Product Description and Initial Setup

Micro SD Card Installation

Guide for inserting and configuring the micro SD card for recording.

First Time Installation Process

Step-by-step instructions for initial camera setup and Wi-Fi connection.

Hey Smart App Integration

Downloading, installing, and using the Hey Smart mobile application.

Motion Detection and SD Card Management

Motion Detection Alerts

Enabling motion detection for push notifications and viewing related snapshots.

SD Card Settings and Access

Managing SD card capacity, recording modes, and accessing recorded footage.

Factory Reset Procedure

Resetting the Camera

Steps to reset the camera to factory settings via the app.

Smart Assistant Integration

Amazon Alexa Setup

Guide to linking the HeySmart app with Amazon Alexa for voice control.

Google Home Setup

Guide to linking the HeySmart app with Google Home for voice control.

PC Connection and Network Configuration

Using WiseeTool.exe

Steps to find and configure the camera's IP address using WiseeTool.

Browser Access

Instructions for accessing the camera feed via web browser using its IP address.

Advanced Parameters and Technical Features

Network Protocols

Details on ONVIF and RTSP parameters for network access.

Camera Specifications

Overview of technical features including sensor, lens, night vision, and connectivity.