8
OPERATION
AC Current Measurement
1. Set the DMM at ACV Function and proper
range.
2. Connect the plug of transducer with DMM
firmly.
3. Press the trigger to open transformer jaws
and clamp one conductor only, making sure
that the jaw is firmly closed around the
conductor and reading the result from the
digital display of DMM.
MAINTENANCE
To keep the instrument clean , wipe the case
with a damp cloth and detergent , do not use
abrasives or solvents.
Any adjustment , maintenance and repair
shall be conducted by a service personnel
.
To Next Page
Loading...
Need help?
General