LIMITED ONE (1) YEAR WARRANTY
If your Iso-Tip tool fails to operate satisfactorily within one
(1) year from the date of original purchase or receipt as
a gift, Iso-Tip will at our option, repair or replace it and
return it to you. Our warranty does not cover worn out
parts. Please call rst to receive an authorization code and
then mail this tool with a note describing the defect and
the date of original purchase or receipt as a gift with the
authorization code (if in warranty) to:
Iso-Tip. A Division of Senasys.
Attn: Returns
704 Bartlett Avenue
Altoona, WI 54720
Tools out of warranty will be repaired at our standard repair
charges. This warranty is void and no repair or replacement
will be made under this warranty or otherwise if:
1. The tool is modied in any manner.
2. The tool is repaired by anyone other than Iso-Tip.
3. The tool has been subjected to unreasonable use.
This warranty gives you specic rights and you may also
have other rights which may vary from state to state.
No other written express warranty is given. Any implied
warranty which may arise from purchase or use is limited
to the one-year period provided in this express warranty.
Some states may not allow such limitation so it may not
apply to you. No responsibility is assumed for incidental
or consequential damages of any type or for the use of
unauthorized attachments. Some states do not allow
the exclusion or limitation of incidental or consequential
damages so the limitation or exclusion many not apply to
you. Warranty valid only in the United States.
OPERATING MANUAL
ISO-TIP Quick Charge
Cordless Rechargeable
Soldering Iron Kit
By ISO-TIP
MODEL NO. 7700
READ ALL INSTRUCTIONS
BEFORE USING THIS TOOL
SAVE THIS BOOK FOR ORDERING INFORMATION
ISO-TIP. A DIVISION OF SENASYS.
WARNING: Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contain chemicals known to the
State of California to cause cancer, birth defects, or other reproductive
harm. Some examples of these chemicals are lead (from lead based paint),
crystalline silica (from bricks, cement, and other masonry products) and
arsenic and chromium (from chemically treated lumber). Your risk from
these exposures vary, depending on how often you do this type of work.
To reduce your exposure to these chemicals, work in a well-ventilated area
and work with approved safety equipment such as dust masks that are
specially designed to lter out microscopic particles.
© 2009 ISO-TIP.
To Next Page
Need help?
General