EasyManua.ls Logo

ISOL-8 MiniSub Wave - Page 7

Default Icon
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If you are in any doubt about any aspect of installation or operation, please
consult your dealer, a qualified electrician or contact ISOL-8 directly for
advice.
Cleaning
Dust the unit regularly with a soft cloth or soft brush. For more stubborn
marks use a slightly damp cloth with a very small amount of mild detergent
such as washing up liquid.
Do not use a wet cloth. Other cleaning or polishing agents should not be used.
Never use abrasives or alcohol based agents, they will harm the surface finish.
Do not allow the unit to become wet when cleaning.
Specification (subject to change)
Number of outlets: 6
Dimensions: 444*85*305mm (W*H*D)
Weight: 6.7Kg MiniSub Axis
6.5Kg MiniSub Wave
Input Voltage: 230VAC version for 220-240VAC
117VAC version for 100-127VAC
Input frequency: 50Hz or 60Hz Nominal
Input socket: IEC fused
Input fuse 10A T ceramic
Maximum total continuous current: 10Amps (shared across all outlets)
High power section
Outputs 1 & 2
Number of outlets: 2
Maximum total continuous current: 10 Amps (any one outlet)
Medium/low power section
Outputs 3 – 6
Number of outlets: 4
Maximum continuous current
any one outlet: 6 Amps
Maximum continuous current
all outlets: 6 Amps