Need help?Do you have a question about the iSolution iMove 350SR and is the answer not in the manual?
General| Color Temperature | 8500K |
|---|---|
| Weight | 16 kg |
| Cooling | Fan cooling |
| Prism | 3-facet |
| Focus | Motorized focus |
| DMX Channels | 16 |
| Dimming | 0-100% |
| Control | DMX512 |
Provides essential safety guidelines for operation, installation, and maintenance.
Highlights user-serviceable parts, opening housing, and contacting dealer for repairs.
Details on secure mounting, safety cables, and professional installation requirements.
Details on housing, ventilation, gobo wheels, prism, and focus.
Specifies the maximum degrees for pan and tilt movement.
Outlines DMX, Master/Slave, Sound Active modes, and adjustable beam angle.
Lists power voltage, consumption, light source, dimensions, and weight.
Identifies display, LED status indicators, and control buttons on the unit.
Describes PowerCon in/out and the port for remote control accessories.
Specifies fuse rating and DMX input/output connections.
Explains the procedure for accessing and changing unit settings via the menu system.
Procedure for setting the DMX starting address from 001 to 512.
Options to choose between 15-channel and 16-channel DMX modes.
Enables selection of built-in show sequences (Show 1-4).
Enables or disables split color mode for enhanced visual effects.
Sets the unit to operate as Slave 1 (normal) or Slave 2 (2-light show).
Enables or disables the blackout feature for silencing the light output.
Controls sound activation and adjusts the microphone sensitivity.
Allows inversion of pan and tilt movement directions.
Adjusts the focus of the gobo patterns for clarity.
Sets a delay for specific functions in 15/16CH modes.
Calibrates the dimmer range for smoother light output.
Initiates a self-test sequence for performance checks.
Shows current unit temperature and total operating hours.
Displays the current software version of the unit.
Resets system parameters to factory default PRO or AUTO settings.
Resets all channels to their standard position.
Adjusts the home position for the pan movement.
Adjusts the home position for the tilt movement.
Adjusts the home position for the color wheel.
Adjusts the home position for Gobo wheel 1.
Adjusts the home position for Gobo wheel 1 rotation.
Adjusts the home position for Gobo wheel 2.
Adjusts the home position for the prism.
Adjusts the home position for prism rotation.
Adjusts the home position for the focus mechanism.
Synchronizes multiple units for automatic, sound-activated light shows.
Sets up Slave 2 mode for contrasting movement between units.
Connects and operates the unit using the optional CA-8 remote controller.
Utilizes a universal DMX controller for precise unit management and programming.
Detailed breakdown of functions assigned to each DMX channel in 15-channel mode.
Detailed breakdown of functions assigned to each DMX channel in 16-channel mode.
Instructions for connecting units, termination resistor, and XLR pin assignments.
Addresses issues like unit failure, DMX response, and sound response.
Guidelines for periodic cleaning to maintain optimal light output and performance.
Statement regarding compliance with EMC and safety directives for the product.
To Next Page
