16
clean the drip tray and cup rack with hot water
clean the steam/hot water nozzle to prevent obstruction of the holes in the end
clean the structure and all the external parts of the machine with a damp cloth. Dry
with a dry cloth to remove any halo and shine the machine
clean the funnel (bottom part of the coffee distribution unit) to remove all residues
of coffee with a damp cloth and run water through it by pressing the coffee switch
7. INVALIDATION OF THE WARRANTY
The warranty will be invalidated and the manufacturer will not accept liability for any
damage due to failure to follow the instructions in this manual.
For operations other than those described contact a qualified service center or the manu-
facturer.
Use of the machine in any other way than as contemplated in the instructions will relie-
ve ISOMAC and all sales outlets of any liability for damage to persons or property.
ISOMAC assures the user of full collaboration for any clarification necessary.
To Next Page
Loading...
