EasyManua.ls Logo

Isomac Millenium - Characteristics and Technical Data; Technical Data RITUALE; Technical Data MILLENNIUM; Safety Recommendations and Rules

Isomac Millenium
28 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. CHARACTERISTICS AND TECHNICAL DATA
The RITUALE/MILLENNIUM espresso coffee machine has the following features:
all AISI 304 stainless steel construction
manual coffee distribution unit in chrome-plated brass
water/steam nozzle in chrome-plated copper
boiler in stainless steel construction
mechanical overpressure with drip tray
adjustable pressure switch
water level sensor
internal exchanger for distribution of water/coffee
copper pipes for water connections
solenoid valve
electronic unit with automatic water refill sensor
micro switch for automatic cutoff of machine in case of lack of water in
tank
Technical Data RITUALE:
Depth: 425 mm Pump: 12-14 atm
Width: 290 mm Tank: 3 l
Height: 420 mm Power: 1400 W
Weight: 22 kg Voltage: 230 V - 50 Hz
115 V - 60 Hz
Technical Data MILLENNIUM:
Depth: 445 mm Pump: 12-14 atm
Width: 290 mm Tank: 3 l
Height: 390 mm Power: 1400 W
Weight: 22 kg Voltage: 230 V - 50 Hz
115 V - 60 Hz
3. SAFETY RECOMMENDATIONS AND RULES
Follow these rules carefully:
! The RITUALE/MILLENNIUM
espresso machine should only be used for the purpose for which
it was made
! improper use of the machine can cause damage to persons and property for which the
manufacturer cannot be held responsible
! always contact a qualified service center or the manufacturer for operations other than those
described in the instruction book and for all types of repairs
! make sure the mains voltage is the same as the data on the rating plate
! make sure the electric power system is compatible with the data on the rating plate
! the coffee maker should be well and safety grounded. Have the system checked if you have any
doubts
! make sure the power system is equipped with a safety cutoff that works properly and that the cross
section of the cables is sufficient for the power absorbed
! for any type of malfunction or problems not specified here, unplug the machine and do not attempt
to check and/or repair it yourself. Contact a qualified service center or the manufacturer
! do not fill the tank with water when the machine is plugged in
! make sure there is water in the tank when the machine is operating
11

Related product manuals