12
2. CHARACTERISTICS AND TECHNICAL DATA
The
RELAX/TEA
espresso coffee machine has the following features:
• coffee maker in chrome-plated brass
• all AISI 304 stainless steel construction
• water/steam nozzle in chrome-plated copper
• boiler in stainless steel construction
• mechanical overpressure with drip tray
• adjustable pressure switch
• water level sensor
• internal exchanger for distribution of water/coffee
• copper pipes for water connections
• solenoid valve
• electronic unit with automatic water refill sensor
• micro switch for automatic cutoff of machine in case of lack of water in tank
Technical Data
RELAX
:
Depth: 415 mm Pump: 12-14 atm
Width: 280 mm Tank: 3 l
Height: 390 mm Power: 1400 W
Weight: 21 kg Voltage: 230V-50Hz
115V-60Hz
Technical Data
TEA
:
Depth: 435 mm Pump: 12-14 atm
Width: 270 mm Tank: 3 l
Height: 400 mm Power: 1400 W
Weight: 21 kg Voltage: 230V-50Hz
115V-60Hz
3. SAFETY RECOMMENDATIONS AND RULES
Follow these rules carefully:
! the
RELAX/TEA
espresso machine should only be used for the purpose for which it was made
! improper use of the machine can cause damage to persons and property for which the
manufacturer cannot be held responsible
! always contact a qualified service center or the manufacturer for operations other than those
described in the instruction book and for all types of repairs
! make sure the mains voltage is the same as the data on the rating plate
! make sure the electric power system is compatible with the data on the rating plate
! the coffee maker should be well and safety grounded. Have the system checked if you have any
doubts
! make sure the power system is equipped with a safety cutoff that works properly and that the cross
section of the cables is sufficient for the power absorbed
! for any type of malfunction or problems not specified here, unplug the machine and do not attempt
to check and/or repair it yourself. Contact a qualified service center or the manufacturer
To Next Page
Loading...
