Isotech ORION 796 - User Manual

Page 1 of 24
Orion 796 Iss.08 – 01/14
STIRRED LIQUID BATH
MODEL ORION 796
User Maintenance Manual/Handbook
Isothermal Technology Limited, Pine Grove, Southport, PR9 9AG, England
Tel: +44 (0)1704 543830 Fax: +44 (0)1704 544799 Internet: www.isotech.co.uk E-mail: info@isotech.co.uk
The company is always willing to give technical advice and assistance where appropriate. Equally, because of the programme of continual
development and improvement we reserve the right to amend or alter characteristics and design without prior notice. This publication is
for information only.

Summary

STIRRED LIQUID BATH MODEL ORION 796 User Maintenance Manual;Handbook

CE EMC INFORMATION

ELECTRICAL SAFETY

Ensures correct earthing and wiring for safe operation, preventing electrical hazards.

HEALTH AND SAFETY INSTRUCTIONS

CAUTIONARY NOTE

ON ARRIVAL

CHILLERS

Chiller function M version

Explains the automatic cooling reduction facility and manual adjustment for the M version chiller.

Chiller function L version

Describes the cascade refrigeration system for the L model, reaching temperatures below -80°C.

SETTING UP

FRONT PANEL CONTROLS

USING THE CONTROLLER

FRONT PANEL LAYOUT

Altering the Setpoint

ADVANCED CONTROLLER FEATURES: SETPOINT RAMP RATE

MONITORING THE CONTROLLER STATUS

OVER TEMPERATURE CONTROLLER (H MODEL ONLY)

OVER AND UNDER TEMPERATURE CONTROLLER (M & L MODEL ONLY)

OVER TEMPERATURE CONDITION

OPERATION AND INITIAL TESTING

USING THE PC INTERFACE

Isotech ORION 796 Specifications

General

Brand	Isotech
Model	ORION 796
Category	Laboratory Equipment
Language	English