EasyManua.ls Logo

Isotek EVO3 SIRIUS User Manual

Isotek EVO3 SIRIUS
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTALLATION INSTRUCTIONS
EVO3 SIRIUS
DO NOT expose this product to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed near the
apparatus. If liquid enters the chassis immediately unplug from
the wall socket.
DO NOT impede ventilation by covering the ventilation openings
with items, such as newspapers, table-cloths, curtains, etc.;
DO NOT expose this product to naked flame sources, such as
lighted candles, these should not be placed near the apparatus;
MAKE SURE that this appliance (CLASS 1) is connected to a mains
outlet socket with protective earth.
PLEASE NOTE that the mains plug is used as the disconnect
device and must remain readily operable.
The six output sockets marked ‘A’ are designed for use with all
electronic devices. These sockets are protected by a 10A fuse
(T10AH250) which can be located in the draw tray under the
IEC input.
The rated maximum total load for all six sockets together is
10A, 2300W.
SAFETY FIRST
PLEASE READ THE FOLLOWING INSTRUCTIONS
BEFORE INSTALLATION
OUTPUT SOCKETS
ADDITIONAL INFORMATION ON FUSING AND RATINGS
A
A
Question and Answer IconNeed help?

Do you have a question about the Isotek EVO3 SIRIUS and is the answer not in the manual?

Isotek EVO3 SIRIUS Specifications

General IconGeneral
BrandIsotek
ModelEVO3 SIRIUS
CategoryAccessories
LanguageEnglish

Summary

Safety First

Pre-Installation Safety Guidelines

Essential safety precautions regarding liquid exposure, ventilation, flame sources, and earthing.

Mains Plug Accessibility

The mains plug serves as the disconnect device and must remain readily accessible.

Output Sockets and Ratings

Fusing and Load Capacity

Details on socket protection, fuse type, and maximum total load for all sockets.

Installation Steps

Unpack Unit

Instructions for carefully unpacking the EVO3 SIRIUS unit.

Connect to Power

Guide for connecting the EVO3 SIRIUS to the mains power supply.

Unit Placement

Guidelines for positioning the EVO3 SIRIUS, including minimum clearance requirements.

Power On

Instructions on how to turn on the EVO3 SIRIUS after installation.

System Upgrade

Information regarding potential system upgrades for the EVO3 SIRIUS.

Service and Repair Information

User Serviceability

Statement that there are no user-serviceable parts inside the unit.

Contact for Support

Instructions to contact support via email if the unit fails or functions unusually.

Warranty Registration

Extend Your Warranty

Information on how to register to extend the product warranty.