EasyManua.ls Logo

Isotronic 70048 - Battery Replacement; Technical Data; Important Battery Notice and Disposal; General Information

Isotronic 70048
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Replacement of the battery
1. Remove the housing cover.
2. Remove the old rechargeable battery from its fitting.
3. Insert 4 new batteries size Mono (D). When doing so, mind the correct polarity
as shown on the bottom inside the battery fitting.
4. Carefully place the battery fitting back on the item.
5. Reattach the casing cover to the casing body.
4. Technical data
Power supply: 4 batteries, size Mono (D), not included
Casing: weather-proof
Effective area: approx. 1.250 m², depending on condition of soil
Frequency range: 400 – 1.000 Hz ± 50 Hz, self-controlling
Interval: approx. 2 sec on, approx. 50 sec off (break interval)
5. Attention: Important battery notice
• Instructions for battery disposal:
Batteries are subject to legal provisions. After use they must therefore be
returned to the point of sale or to a collecting point of public facilities for harmful
substances. Batteries may never be disposed as household waste, in the
yellow sack or other. Dispose of batteries only when completely discharged into
a waste batteries collecting container and take precautions against short circuit
(e.g. by masking the poles).
6. General information
1. Electric appliances, packaging material etc. should be kept away from children.
2. Dispose packaging and worn out material correctly and in an environmentally
friendly way.
3. Do only pass on the device including the operation manual.
4. Subject to change of design and technical data without notice for the sake of
constant product improvement.