HOW TO USE THE EM-110 EARBUDS
1. Turn down your audio device to the lowest level.
2. Place the earbuds firmly in each ear until they fit comfortably.
3. Raise the audio to a comfortable volume.
4. To answer a call, press the phone button once. To end a call, press the phone button again.
NOTE: For compatible devices, the phone button can be used as a PLAY/PAUSE button.
Other functions such as Next Track/Previous Track/Fast Forward/Rewind may be possible by
pressing/holding the phone button. Some functions may require multiple presses.
SAFETY WARNING
• Do not listen at a high volume level. Extended high volume levels can lead to permanent
hearing loss.
• Start with setting the volume level at the lowest volume and adjust until you reach a
comfortable volume level.
• Do not use when a failure to hear your surroundings could be dangerous, such as while
driving, or when biking, walking, or jogging where traffic is present and accidents may occur.
• Do not use while sleeping as accidents may occur.
• If you experience any ringing in your ears, try lowering the volume. If the ringing persists,
visit your physician.
TECHNICAL SPECIFICATIONS
Driver Unit: Ø8mm.6u
Sensitivity: 98dB/1mW(S.P.L at 1KHz)
Impedance: 16Ω
Frequency Range: 20Hz - 20kHz
Rated Power: 3mw
Max. Power: 10mw
Cable: 1.20m±0.03m
Plug: Ø3.5mm
To Next Page
Loading...
