iSP Technologies STEALTH - Stealth Power Amplifier Specifications

STEALTH SPECIFICATIONS
INPUT IMPEDANCE
OUTPUT POWER MONO
OUTPUT POWER BRIDGED
INPUT SENSITIVITY / MAX OUTPUT
MAXIMUM INPUT SIGNAL
VOLTAGE GAIN
NOISE FLOOR
DYNAMIC RANGE
DISTORTION
FREQUENCY RESPONSE
INPUT POWER
DIMENSIONS
WEIGHT
PROTECTION
500k Stereo / 250k Mono Bridged
4Ω=75WRMS@1% THD/ 90WRMS@10%
8Ω=45WRMS@1% THD / 60WRMS@10%
8Ω=140WRMS@1% THD / 175WRMS@10%
16Ω=80WRMS@1% THD/ 106WRMS@ 10%
-3dBu / .56vrms
+17dBu
30dB Stereo / 36dB Mono Bridged
-75dBu
102db A WTD
@10dBu output=.02% Full Output=.1%
20Hz – 20KHz = +0 / -.5dB
187mA @idle 7.8A full power @8Ω Bridged
9” W x 2” H x 4” D
1.2 LBS
Auto shutdown / Output shorts or low load
impedance. Protected for open loads.
Note: 0dbu = .775 vrms
The Stealth Power Amplifier is covered under US Patent 6,831,514
Other US and Foreign Patents Pending.