Need help?Do you have a question about the iSP Technologies STEALTH and is the answer not in the manual?
Avoid using the unit near water, rain, or moisture, and prevent spills or foreign objects.
Controls the audio level for both Channel 1 and Channel 2 in Stereo and Bridge Modes.
Connects the speaker for Channel 2, supporting 4, 8, or 16 ohm loads.
Connects the speaker for Channel 1, supporting 4, 8, or 16 ohm loads.
Connects the speaker for Mono Bridged operation, supporting 8 or 16 ohm loads.
Connection point for the external 19VDC power adaptor; use only the supplied unit.
Blue LED that indicates when the unit's power is currently ON.
Connects the audio input signal for Channel 2 using a 1/4 inch connector.
Connects the audio input signal for Channel 1 using a 1/4 inch connector.
General| Cooling | Fan Cooled |
|---|---|
| Channels | 2 |
| Impedance | 4/8 ohms |
| Controls | Gain |
| Inputs | 1/4" Jack |
| Outputs | 1/4" |
To Next Page
