Rear Seats
Rear Seat Operation (Extended Cab)
If your vehicle has an
extended cab, there
may be forward folding
seats in the rear area.
To fold the rear seat cushion(s) from the stored position
to the sitting position, pull the front of the seat cushion
down completely.
The rear seat storage compartments must be closed
before folding the seat down. See Rear Storage Area
on page 2-40.
To store the seat, do the following:
Notice: Folding a rear seat with the safety belts
still fastened may cause damage to the seat or
the safety belts. Always unbuckle the safety belts
and return them to their normal stowed position
before folding a rear seat.
1. Secure the safety belt buckle to the inboard side
of the seat with the hook and loop fastener (A),
so that it does not move when not in use.
2. Push the entire seat up until it is flush with the
trim panel.
1-9
2008 - Isuzu 290/370 Owner Manual
To Next Page
Loading...
Need help?
General
